In this article, we will explain about How to fix iPhone not going to sleep mode? Find out, the following reviews.
If your iPhone screen does not turn off automatically when not in use, you can find below steps to fix iPhone not going to sleep mode.
How to Fix iPhone Not Going to Sleep Mode
By default, iPhone is set to automatically switch off its display and go into sleep mode after a period of inactivity. If it doesn’t, your device is likely to suffer from poor battery life and require frequent charging.
The most common reason why iPhone won’t go to sleep mode is to turn off the auto lock option or choose a longer auto lock time on the device.
Besides, Raise to Wake function, change or corruption in Settings and other reasons can prevent iPhone from going to sleep mode.
Change auto lock time on iPhone
Open Settings> go to Display & Brightness> Auto Lock> choose the length of time after which you want the screen to Switch off if your iPhone is not actively in use.
As you can see in the image above, the iPhone allows you to choose from 30 seconds, 1 minute, 2 minutes, 3 minutes, 4 minutes, 5 minutes, or never.
Disable lifting to wake up
When Raise to Wake is enabled on your iPhone, it can automatically turn on its display as soon as it picks up. However, this feature can sometimes keep the iPhone awake, even when it’s just being worn.
Install updates
Sometimes the problem could be caused by an update waiting to be installed on your device.
Go to Settings> General> Software Update> tap Download and Install (the option only appears when an update is available).
Reset all settings
If the above solutions didn’t work for you, it’s time to reset all the settings on your device to the original factory settings and see if that helps to fix the problem.
Go to Settings> General> Move or Reset iPhone> Reset> In the popup, select Reset All Settings.
Enter your lock screen password when prompted> On the confirmation popup, tap Reset All Settings to confirm.
Force restart your iPhone
The iPhone force restart process is defined by Apple and varies by device model.
iPhone 6s and below: Press and hold the Power and Home buttons until you see the device begins with the Apple logo.
iPhone 7, 7 Plus: Press and hold the Power and Volume Down buttons until you see your iPhone starts with the Apple logo.
iPhone 8, 8 Plus: Press and release the Volume Up button> Press and release the Volume Down button> then press and hold the Power button until you see the device starts with the Apple logo.
iPhone X and Above: Press and release the Volume Up button> Press and release the Volume Down button> Press and hold the Power button (side button) until you see the device starts with the Apple logo.
Try DFU Mode Restore
If your iPhone doesn’t vibrate due to damaged hardware settings, you will have to perform a DFU Mode Restore to fix the problem.
The DFU restore process will erase both the software and hardware settings on the iPhone and reinstall the operating system software and firmware on the iPhone.
Here’s how to fix an iPhone that won’t go to sleep mode. Visit our site Suntamah.com for the latest technology articles.