How To Fix Windows 11 Black Screen Issue – When you log in to your computer or see your regular desktop, there is no reason to be worried if the screen is black or blank.
Sometimes Windows Explorer or other drivers have bugs, and this causes the problem. It is easy to fix, and takes only a little time.
Resetting your operating system is not a big deal, if necessary. The worst case scenario is that you would have to do this.
Causes for Windows 11 Black Screen
There are a few reasons why the Windows 11 black screen error might occur:
- If the monitor connection is having problems, it will be displayed here.
- Windows Explorer is not running.
- The registry settings are set up incorrectly.
- Problems with the graphics driver can cause problems with the computer’s graphics.
- Windows updates can have bugs.
How to Fix Windows 11 Black Screen Issue?
There are certain methods that work for all cases of the black screen error, and others that apply to how the error happened. Check out the solutions below that can help resolve the Black Screen error.
1. Check for Connection Issues
If after powering up the computer the screen remains black, it is likely because of unstable hardware connections. Make sure the following connections are solid:
- Monitor cable: Always check the connection between monitor and CPU. It’s best to put it back in the CPU socket properly.
- GPU Cards: These are the primary devices for rendering your PC’s display. Using them incorrectly can block your ads.
- RAM: Faulty RAM can cause many system problems. So take them out and put them back in the RAM slot. Be sure to clean them before putting them back in place.
If you’re having trouble checking such connections, it’s best to contact a hardware specialist.
2. Troubleshoot Graphics Driver
Outdated or buggy graphics drivers are often responsible for this problem. If you get a black screen after logging in, try restarting the graphics driver first. You can do this by pressing the Win + Ctrl + Shift + B hotkey.
If it doesn’t work, you need to update the driver.
- Run a new task in Task Manager.
- Enter devmgmt.msc.
- Expand Display adapters.
- Right click on your device and select Update driver.
- Select Search for drivers automatically.
You can also install the latest drivers from their official website. If you already have the latest versions, try reinstalling the drivers.
If you are unable to log into your account, you must start your computer in safe mode and update or uninstall the driver. To boot into Safe Mode:
- Force your computer to shut down three times. You have to press and hold the power button for a few seconds to force shutdown.
- On the third start, you’ll see the Startup Repair screen.
- Click Advanced Options.
- Go to Troubleshooting> Advanced Options> Startup Settings> Restart.
- After restarting, you’ll see a couple of options.
- Press 5 or F5 to start the computer in Safe Mode.
Then follow the steps above to update or reinstall the display drivers.
3. Start or Restart Windows Explorer
If this problem occurs after logging in, it is likely that Windows Explorer is not working or has other problems. It is also the most likely cause of a black screen accidentally appearing while using the computer. Start or restart the process to fix the problem. To do this,
- Press Ctrl + Shift + Esc to open the Task Manager.
- Go to the Details tab and look for the explorer.exe file.
- Right-click it and select End Task.
- Then select File> Run New Task from the menu bar.
- Type explorer.exe and hit Enter.
If you are unable to run explorer.exe, it may be damaged or missing. To fix this problem, you need to repair the integrity of the system files. We recommend running the SFC, DISM and CHKDSK tools. Check out our article on how to repair damaged Windows files for the necessary steps.
4. Change Registry Settings
If Windows Explorer doesn’t start every time you log on to the computer, a registry entry is likely responsible. To change its setting,
- Open Task Manager and select File> Run New Task.
- Type regedit and press Enter.
- Go to Computer \ HKEY_LOCAL_MACHINE \ Software \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon
- Search and double-click Shell.
- Set the value data to explorer.exe and click Enter.
Restart your computer from the Ctrl + Alt + Del screen and see if the error clears.
We strongly recommend that you back up the registry before making any changes to it.
5. Disable App Readiness Service
This is another possible solution for a black screen if the cursor is visible. Sometimes the app readiness service runs and freezes after logging into your account. In such a scenario, if you look at Event Viewer (Run new task as eventvwr), you will likely see an error like:
“A timeout (30000 milliseconds)… transaction response from the AppReadiness service.”
You must disable this service to fix the problem. To do this:
- Open Task Manager and go to File> Run New Task.
- Enter services.msc.
- Double-click Application Standby and set the Startup Type to Disabled.
- Click Apply and OK.
Restart your computer and check if the problem persists.
6. Power Cycle PC
Another case of a black screen occurs before the login screen is displayed. In these cases, the first thing you should do is restart your computer. Here’s how you can do it:
- Turn off the computer and remove all peripherals.
- Disconnect the power cord and laptop battery.
- Press the power button for 20 seconds.
Reinsert the battery or power cord and turn on the computer.
7. Run Memory Diagnostic
Faulty RAM or slots are responsible for many system problems. It is better to run the Memory Diagnostics to check for such defects. To do this,
- Run a new task in the Task Manager.
- Enter mdsched to open the diagnostic tool.
- Click Restart Now.
The troubleshooter will run after the restart and check for any bugs. Then, after rebooting, it will show you the results. Take your computer to a hardware expert to repair or replace any faulty RAM or slots.
We have a detailed article on how to open and run Windows Memory Diagnostics. Check it out for more information on the process.
8. Update or Rollback OS
If this error occurs after updating the system or upgrading, it may be a problem with the update. Report it to Microsoft and wait for the next updates or fixes. Make sure to install them as soon as they are available.
In the meantime, you can go back to the previous version. To do this,
- Open Task Manager and select File > Run New Task.
- Type cmd, check Create this task with administrative privileges, and click OK.
- If you are unable to log in to an account, log in to WinRE and go to Troubleshoot > Advanced Options > Command Prompt.
- Type wmic qfe list brief /format: table and press Enter.
- List all your updates. Find the latest one by looking in the InstalledOn column and note its HotFixID.
- Enter the command wusa/uninstall/kb:”HotFixID”. Don’t forget to replace “HotFixID” with the HotFixID number. For example, wuse /uninstall /kb:5013624.
You can also roll back Windows 10 from 11 within 10 days of upgrading. To do this,
- Open an elevated command prompt.
- Enter DISM / Online / Initiate-OSUninstall.
Restart your computer and check if the error clears.
9. Check for Malware and Third-party Interference
In rare cases, this problem is due to the interference of malware or third parties. Start your computer in Safe Mode and check if the error clears. If so, third-party apps are likely responsible. First, scan your computer and uninstall any recently-installed applications. Then reboot and boot in normal mode.
You can scan your system even if you are unable to boot into Safe Mode. To do this,
- Go to the WinRE command prompt.
- Enter the following commands:
- cd C: \ ProgramData \ Microsoft \ Windows Defender \ Platform \ 4. *
- MpCmdRun -Scan -Scan type 2
10. Startup Repair
Another possible solution to a black screen before logging in is to run a startup repair. It checks for and fixes minor problems that you may encounter while booting. To run this troubleshooter,
Hard reset your computer three times by holding down the power button. It will automatically run a startup repair. Alternatively, you can select Troubleshooting> Advanced Options> Startup Repair in WinRE.
If Startup Repair cannot find or fix any errors, you can try again after rebuilding the BCD.
11. Restore or Reset System
If you have a restore point where this error did not exist, you can go back to that point. To do this, type rstrui at the command prompt. Or, you can go to Troubleshooting> Advanced Options> System Restore from WinRE.
If you don’t have a proper restore point, you have to factory reset your system as a last resort.
You can also clean Windows 10 on your PC if there’s an error after upgrading to 11.
FAQ
How to fix Windows 11 Black Screen of Death?
Windows Black Screen of Death is a system crash that leads to a black screen with an error message. Typically, the crash error code can be found in the message. Searching for it on the Internet should show you some troubleshooting methods you can use.
In general, you need to do the following:
- Check your RAM, GPU or peripherals.
- Examine the crash mini-dump file.
- Reset GPU or BIOS settings.
- Update all drivers.
Thats several way to fix windows 11 black screen issue. Visit our site Suntamah.com, to get more information about technology.